Connecting To A Pc (Via A Network) - Panasonic Lumix DMC-ZS45 Owner's Manual

Connecting to a PC (via a network)

You can select the method for connecting to a wireless access
point.
¢ WPS refers to a function that allows you to easily configure the
settings related to the connection and security of wireless LAN
devices.
To check if the wireless access point you are using is compatible
with WPS, refer to the manual of the wireless access point.
Connection method
[WPS (Push-Button)]
[WPS (PIN code)]
[From List]
Wi-Fi
Save push button type wireless access point that is compatible with
Wi-Fi Protected Setup
Press the wireless access point WPS
button until it switches to WPS Mode.
•
Refer to the wireless access point instruction
manual for details.
Save PIN code type wireless access point that is compatible with Wi-Fi
Protected Setup with a WPS mark.
1
Press 3/4 to select the wireless access point you are
connecting to, and press [MENU/SET].
2
Enter the PIN code displayed on the camera screen into
the wireless access point.
3
Press [MENU/SET].
•
Refer to the wireless access point instruction manual for details.
Select this option when you are not sure about the WPS compatibility, or
when you want to search for and connect to a wireless access point.
•
Refer to P147 for details.
- 146 -
Description of settings
TM
with a WPS mark.
Select connection method
Use button on
WPS (Push-Button)
the WPS device
WPS (PIN code)
From List
WPS button
WPS
Cancel Select
e.g.:
Set