Panasonic Lumix DMC-ZS45 Owner's Manual page 137

Sending an image each time a recording is made ([Send Images While Recording])
1
Press [Wi-Fi].
2
Press 3/4/2/1 to select [New Connection], and then press [MENU/SET].
3
Press 3/4 to select [Send Images While Recording],
and then press [MENU/SET].
4
Press 3/4 to select [Smartphone], and then press
[MENU/SET].
5
Press [MENU/SET].
6
Press [MENU/SET].
•
For details on the connection methods, refer to P130, 131.
7
Press 3/4 to select a device you want to connect, and then press [MENU/SET].
8
Check the send setting, and then press [MENU/SET].
•
To change the send setting, press [DISP.].
9
Take pictures.
•
The pictures are sent automatically after taking them.
•
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
•
You cannot record motion pictures when the camera is connected using [Send Images While
Recording].
Wi-Fi
(P152)
(P126)
- 137 -
Select a function
Remote Shooting & View
Send Images While Recording
Send Images Stored in the Camera
Cancel Select Set