AEG SCT81800S0 User Manual page 18

18 www.aeg.com
7.5 Ventilation requirements
5 cm
7.6 Installing the appliance
CAUTION!
Make sure that the mains cable
can move freely.
min.
200 cm
2
min.
200 cm
• Loosen the middle hinge.
• Remove the lower door.
• Loosen and remove the lower pin.
On the opposite side:
• Tighten the lower pin.
• Install the lower door.
• Tighten the middle hinge.
• Install the spacer.
• Install the upper door.
• Tighten the upper pin.
The airflow behind the appliance must
be sufficient.
2
Do the following steps: