AEG SCT81800S0 User Manual page 17

3. Connect the wire coloured brown to
the terminal either marked with the
"L" or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp D
is secure over the outer sheath.
5. Make sure the electricity supply volt-
age is the same as that indicated on
the appliance rating plate.
6. Switch on the appliance.
7.3 Installation of the Taste Guard Filter
7.4 Door reversibility
The appliance is supplied with a 13 amp
plug fitted B. In the event of having to
change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse
must be used.
WARNING!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard. Ensure that it is
disposed of safely.
The Taste Guard Filter is an active car-
bon filter which absorbs bad odors and
permits to maintain the best flavour and
aroma for all foodstuffs without risk of
odor cross contamination.
On delivery the carbon filter is in a plas-
tic bag to preserve performance.
The filter should be placed in the drawer
before the appliance is turned on.
1. Open the drawer.
2. Remove the filter from the plastic
bag.
3. Insert the filter in he drawer.
4. Close the drawer.
During operation, always keep the air
ventilation drawer closed.
Handle the filter carefully so fragments
do not loosen from the surface.
Make sure that the air lever drawer is
closed to obtain proper function.
The door of the appliance opens to the
right. To open the door to the left, do
these steps before you install the appli-
ance.
• Loosen and remove the upper pin.
• Remove the upper door.
• Remove the spacer.
ENGLISH
17