Advertisement
ii) Continue to press the right
ARROW UP button. The LCD screen
will display 'MANUAL LIFT' and
'- - : - -' on the right side of the LCD.
iii) Once the Tea Maker™ is activated and
the correct water temperature is reached,
the basket will automatically lower.
iv) In the manual lift mode, the LCD
screen will automatically commence
the 'Brew Time' feature. This feature
counts up to a maximum of 60 minutes,
allowing you to monitor how long
the basket has been submerged.
v) Once the desired brew time has elapsed,
press and hold the BASKET button
for 2 seconds. The basket will rise.
vi) Once the brewing is complete, the
LCD screen will automatically display
the 'Time Since Brew' function. This
function counts up to a maximum of
60 minutes, allowing you to monitor
the freshness of your brew. It does
not activate the heating elements.
NOTE
Once a customised time has been selected
and one tea making or water heating
cycle has been activated, the customised
time will remain in the memory of the
Tea Maker™ until you change it. To
return to default settings, see page 18.
AUTO START FEATURE
This feature allows you to program the
specific time when the Tea Maker™ will
automatically turn on and start either a tea
brewing cycle or water heating cycle.
Setting the 'Auto Start' Feature
1. Press and hold the AUTO START button
for 2 seconds. The button surround will
illuminate and the tea alert will sound.
2. The LCD screen will display the
START clock symbol and a blinking
CURRENT TIME and START TIME.
3. To set the CURRENT TIME, press the left
ARROW UP button to increase the time,
or the left
ARROW DOWN button to
decrease the time in 1 minute increments.
Ensure the correct 'AM' or 'PM' is displayed.
RESETTING DEFAULT
SETTINGS/STANDBY MODE
NOTE
Pressing and holding the
UP button or
ARROW DOWN button
will increase the scrolling speed.
4. To set the START TIME, press the right
ARROW UP button to increase the time,
or the right
ARROW DOWN button to
decrease the time in 1 minute increments.
Ensure the correct 'AM' or 'PM' is displayed.
5. Once current time and start time are
programmed, press either the flashing
HOT WATER/Cancel or TEA/Cancel
button to select which feature you would
like to start at the programmed time.
6. The LCD screen will display the current
time and start time, in addition to the
AUTO START symbol. The AUTO
START button surround will illuminate
and remain illuminated until the START
TIME is reached, indicating that the
'Auto Start' feature has been activated.
7. Ensure that the Tea Maker™
is prepared with:
a) Sufficient water in the glass jug
and tea leaves in the basket for the
tea brewing cycle or,
b) Sufficient water in the glass jug
for the water heating cycle.
AUTO
ARROW
17
Advertisement
