Saveo Scan M12D-H User Manual

SAVEO-SCAN-M12D-H
Getting Started
Switch on and Charge your Scanner
Please switch on your scanner (as illustrated) and place it in the
cradle to charge for 3~4 hours before rst use.
If you want to charge smartphone and scanner simultaneously,
please switch scanner to right "C" (charge mode) before placing
it in the cradle.
Power on Saveo Scan
On the underside of the scanner you will nd a small recessed
button.
Use a pen or paper clip to push the button until you hear a
noti cation sound.
Ensure power switch remains depressed after you release it.
Power Switch
Power switch is located on the
underside of the scanner.
1
Operating Elements
*Please remove the protective sticker from window
before use
Universal Holder
Exit Window
Trigger/Power
On button
Wrist Strap
Micro USB Cable
Use Micro USB cable to connect
to smartphone/tablet
Switch for Operation Mode
and Charge Mode/Bluetooth
Mode
LED indicator
Charging Cradle
2
Attach your smartphone
Attaching your smartphone to scanner using the
universal holder
Extend the retractable arm before placing phone in holder and
then pushing it rmly back against the phone.
Extend retractable
arm
Press button and slide
outwards to extend the
arm
Insert phone
Secure phone in
holder
Connect phone to scanner with Micro USB
As USB connection locations vary on di erent models of
smartphone, the cable can be con gured for your speci c
model. For iOS devices, please attach the appropriate
adapter to connect to your device.
3