Table of Contents
Advertisement
CLEANING THE FILTER
Removing/Replacing the Filter
Important: Before removing or
refitting the filter, switch the kettle off
and empty. Allow to cool completely
then unplug the power base.
To Remove the Filter
•
Ensure the kettle has cooled
fully and is empty.
•
Open the kettle lid by pulling
the latch on the lid backwards
towards the handle and rest the
lid on its hinge. Identify the
filter, which is inside the kettle
positioned over the spout
entrance.
•
Pull plastic tab (A) away from
the spout entrance until the two
tabs on the filter (B) are
released from the spout. The
filter can then be lifted out.
A
B
C
Cleaning the Filter
•
Rinse filter under a tap whilst
brushing with a soft brush. In
hard water areas it may be
necessary to descale with a
descaling agent.
Use a proprietary descaler,
following the manufacturer's
instructions carefully. The filter
may be washed safely in a
dishwasher.
Replacing the Filter
•
Locate the small slot (C) over
the tab at the bottom of the
spout.
•
Press down gently on the filter
and, at the same time, align the
filter back over the spout until
the two tabs (B) click in place
securely.
B
Notes
Ensure that the filter is
securely in position prior to
use.
To prevent damage to the
filter, avoid pressing the
mesh.
6
Advertisement
Table of Contents
