Dvi (Same As Hdmi But Requires An Audio Connection) - Sharp LC-32LB261U User Manual

DVI (same as HDMI but requires an audio connection)

On your TV
HDMI cable Audio cable
connector connector
HDMI 1/ PC/DVI
ARC/DVI AUDIO IN
jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to
the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to the HDMI 1/ARC/DVI jack on the side of your TV.
5 Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT jacks
on the cable or satellite box.
6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7 Press INPUT to open the INPUT SOURCE list.
8 Press or to select HDMI 1, then press ENTER.
14
Note
You must use the HDMI 1/ARC/DVI jack to connect a cable or satellite box
using DVI. If you use another HDMI jack, you will not hear sound from the TV
speakers.
jack
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio
output is analog.
Side of TV
HDMI cable with
HDMI-DVI
adapter
Back of TV
LC-32LB261U Sharp 32" LED TV
Cable or
satellite box
Audio cable