Component Video (Better) - Sharp LC-32LB261U User Manual

Component video (better)

On your TV
Component Audio cable
video cable connectors
connectors
Component Analog
video jacks audio jacks
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the Y/VIDEO, P
component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the L and R audio jacks on the back of your TV and to the audio out jacks on
the cable or satellite TV box.
5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press or to select Component, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Important
• The Y/VIDEO, P , and P
B
video device) share the L and R audio jacks with the Y/VIDEO jack (used
to connect an AV device). You can only connect one component video
or AV device at a time. We suggest upgrading to HDMI if your DVD or
Blu-ray player supports it.
• When you connect the audio using the L and R audio jacks, the audio
output is analog.
Component video cable
Back of TV
, and P
B
video jacks (used to connect a component
R
LC-32LB261U Sharp 32" LED TV
Cable or
satellite box
Audio cable
video jacks on the back of your TV and the
R
15