Table of Contents
Advertisement
7
2.
Place loading ramps. Secure hooks oframps firmly and flush with loading deck.
3.
Shift auxiliary transmission shift lever to [Low] and drive machine slowly forward onto
loading deck. Set cutting height to the highest. Pay attention not to hit loading lamp or
loading deck when loading on a transporter.
4.
Park machine according to the instructions in "Parking" (Page 32). Tie machine with
rope or tie-down belts and secure it onto loading deck of transporter securely.
Hoisting
• Licence or certification is required to operate a crane. Check your local
regulations.
• Use hoisting sling of sufficient strength. Always use the slings of the same
length when more than one is used.
• Pay special attention to the center of gravitiy and the balance of machine when
hoisting.
5332M-0702-010E
Transporting
1.
Lift seat.
2.
Attach hoisting slings to 2 lift hooks and hoist
machine.
Hooks
-84-
Advertisement
Table of Contents
