CanyCom CMX 253 Operator's Manual page 88

Ride-on brushcutters
Table of Contents

Advertisement

Area
Malfunction
Poor power or
acceleration
Irregular noise or
vibration from or
around the engine
Excessive oil
consumption
Engine overheats
Engine
Excessive fuel
consumption
Black smoke comes
out of exhaust
White or blue smoke
comes out of exhaust
Troubleshooting
Possible Cause
Bad fuel
Insufficient intake air
(clogged air cleaner).
Loose drive belt.
Excessive load
Other (other than the
above).
Insufficient amount of
engine oil.
Rotating screen
or cooling fins are
clogged or blocked.
Clogged air cleaner.
Other (other than the
above).
Clogged air cleaner.
Other (other than the
above).
Bad fuel.
Engine oil level is too
high.
Wrong engine oil.
Other (other than the
above).
-79-
Corrective Measure
→Change fuel.
→Clean or replace the
air cleaner.
→Adjust
→Reduce load.
→Please contact
your CANYCOM
representative.
→Please contact
your CANYCOM
representative.
→Please contact
your CANYCOM
representative.
→Fill oil.
→Clean.
→Clean or replace the
air cleaner.
→Please contact
your CANYCOM
representative.
→Clean or replace the
air cleaner.
→Please contact
your CANYCOM
representative.
→Change fuel.
→Adjust the oil level.
→Change oil.
→Please contact
your CANYCOM
representative.
6
Ref.
Page 58
Page 64
Page 56
Page 58
Page 58
Page 56
Page 56

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmx 252

Table of Contents