Table of Contents
Advertisement
Chassis
• Perform a pre-startup inspection (PSI) before each use, a monthly inspection once a
month, and a yearly inspection once a year.
• Some maintenance procedures described below may require special knowledge
or tools and instruments. Contact your CANYCOM representative to perform such
procedures.
Item
Tires
Transmission
Auxiliary
Transmission
Front Axle
HST
Maintenance
Description
Tires shall be inflated to the specified
pressure.
Tires and wheels shall be free of crack,
damage, or uneven wear.
Wheel bolts shall not be loose or missing.
Wheel bearings do not exhibit excessive play
and no irregular noise or overheating shall
be observed.
Irregular noise or overheating shall not be
observed when moving forward or backward.
There shall not be oil leaks in or around
transmission.
Transmission can be shifted to either position
positively and performs normally.
Lever shall not be loose or have excessive
play.
Irregular noise or overheating shall not be
observed when traveling.
There shall not be oil leaks in or around front
differential case or knuckles.
HST shall perform normally.
Hydraulic fluid shall be filled to a proper
level and shall be clean and free of dirt or
contamination.
Lever or pedal shall not be loose or have
excessive play.
Schedule
√ √ √
√ √
√ √ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √ √
√ √
√ √
-43-
Note
Page 60
Page 62
5
Advertisement
Table of Contents
