Table of Contents
Advertisement
4
• Inspect the work site beforehand; inspect terrain and locate holes, drops, or
obstacles. Also inspect overhead obstacles such as the branches of a tree. Pay
special attention when working near these areas.
• Do not use this machine on an incline steeper than 25 degres for the CMX253 or
15 degrees for the CM252.
• Always stay on machine when working.
• Make sure air intake for cooling is not clogged or blocked. If it is clogged or
blocked, it causes overheating, resulting in damages to machine.
• When working in a dusty area, clean air cleaner element twice a day. Dirty air
cleaner element results in poor starting, poor performance, or short life.
• When a cutting blade is broken, replace it and the other blade with a new pair. A
broken blade causes excessive vibration, which damages machine.
• When something is tangled to cutting blade, stop engine immediately and
remove the tangled object. Such object causes excessive vibration, which
damages machine.
• Beware of the width of cutting decks. On this machine, cutting decks are wider
than the rest of the machine, and they protrude beyond wheel tracks. Make
sure not to hit decks with obstacles, particularly when they are translated to the
right. Hitting decks may damage translating mechanism.
Operation
-38-
Advertisement
Table of Contents
