Ricoh Pro C9100 Read This First Manual page 15

Hide thumbs Also See for Pro C9100:

Table of Contents

• Be sure to disconnect the plug from the wall outlet at least once a year and check for the

following:

• There are burn marks on the plug.

• The prongs on the plug are deformed.

• If any of the above conditions exist, do not use the plug and consult your dealer or service

representative. Use of the plug could result in fire or electric shock.

• Be sure to disconnect the power cord from the wall outlet at least once a year and check for the

following:

• The power cord's inner wires are exposed, broken, etc.

• The power cord's coating has a crack or dent.

• When bending the power cord, the power turns off and on.

• Part of the power cord becomes hot.

• The power cord is damaged.

• If any of the above conditions exist, do not use the power cord and consult your dealer or

service representative. Use of the power cord could result in fire or electric shock.

• When this machine's circuit breaker is set to "Off", do not switch it to "On". Doing so could result

in electric shock, fire, smoke, or tripping of the room's breakers.

• This machine uses two power cords. To stop the power supply of the machine completely,

remove both power plugs. Unless both power plugs are removed, fire or electric shock may

result.

• The capacity of power in this machine is 60 A and 9,000 W with both cords combined.

Connect each cord to separate power sources with independent breakers. If you connect to an

electrical outlet that is connected to the same breaker, the breaker may cut off power.

• Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs

create an unstable connection that can result in unsafe buildup of heat.

• If this machine is not going to be used for several days or longer at a time, disconnect its power

cord from the wall outlet.

• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.

Pulling the cord can damage the power cord. Use of damaged power cords could result in fire

or electric shock.

Safety Information

Table of Contents

Pro c9110