1. Select the desired channel then press the
to start recording the current broadcast. A progress bar will be displayed
at the bottom of the screen.
2. Recording stops when you press the EXIT button and the recorded file is
stored in the external USB device automatically.
NOTE: You can only watch channels on the same frequency as the program
being recorded. If you try to change to another channel or change to the main
interface screen, a message will appear prompting you to continue or "STOP
RECORDING. System will stop record if user want to channel up/down, Confirm
or Cancel."
In DTV mode, press the "GUIDE" button to enter the
Electronic Program Guide. At Guide menu, press "RED"
button to change to "Record" Setting.
At Guide menu, press the "OK" button to enter the
●
button on the remote control
29