Advertisement
PVR recording.
: Press the "OK" button to enter the submenu and press / to
•
choose the disk to use for PVR.
•
to choose the file size.
: Press the "OK" button to enter the format submenu. The disk
•
must be formatted when first used for PVR. Do not disconnect disk or turn
power off during formatting. When formatting your disk, a progress bar
will appear on the display.
NOTE: The larger your device the longer it will take to format. The device
may take many minutes to format. This is not a malfunction, please wait
for the formatting to finish.
•
If the disk for PVR is ready, the programs can be recorded
in DTV mode.
In DTV mode, press / ► button to pause the DTV
program, then press it again to continue playing. The
length of time a program can be paused depends upon
the setting in the PVR File System. Press "EXIT" to stop
the time shift.
Press the PLAY button to continue playing the program
from the point where it was paused.
NOTE: Time Shift will stop if you change channels, change
inputs or go into standby mode while in Time Shift mode.
: Press the "OK" button to enter the submenu and press / ▲ ▼
: Test your disk speed.
◀ ▶
28
Advertisement
