Advertisement
In the first menu item, press OK button to enter the "Clock Setting" menu to set
the Date and Time.
In "Auto Mode", you can get the time automatically from DTV or the internet.
In "On Time", press the OK button to enter the submenu.
Set the time for the TV set to turn on when the TV set is in
standby mode.
In "Off Time", press the OK button to enter the submenu.
Set the time for when you want the TV set to turn off.
1. Press / ▲ ▼ key to select "Sleep Timer" option.
2. Press / ◀ ▶ key repeatedly until the desired time appears (Off, 10min, 20min,
30min, 60min, 90min, 120min, 180min, 240min).
Notes:
The sleep timer you have set will be cancelled when the TV turns off, or if
•
a power failure occurs.
When the time remaining is less than 60 seconds, reminder information
•
will be displayed on the screen. Press any key button to cancel the timer
function.
You can choose to modify your time zone in the TV settings.
1. Press / ▲ ▼ key to select "Time Zone" option.
2. Press / ◀ ▶ key to select time zone.
1. Before connecting your USB device to the TV, please back up your files to
prevent them from damage or loss of data.
2. A USB disk must be formatted when first used for PVR. Any existing data
on the disk will be lost during the formatting process. Please back up your
disk if you do not want to lose this data. It is recommended that you use a
dedicated disk for PVR use only. Do not disconnect disk or power during
formatting.
3. Do not modify PVR files on a PC.
Note: Make sure your USB device is compatible with the TV and able to support
27
Advertisement
