AT&T CL80143 User Manual page 11

Getting started
Battery installation and charging
1. Plug the battery connector securely into the socket inside the
handset battery compartment. Insert the supplied battery with
the label THIS SIDE UP facing up, as indicated .
2. Align the cover flat against the battery compartment, then slide
it upwards until it clicks into place.
CHARGE light
3. Charge the handset by placing it face forward in
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery
(model BT183342).
www.telephones.att.com
In Canada, dial
2. If you do not use the handset for a long time, disconnect and remove
the battery to prevent possible leakage.
the telephone base or charger. The CHARGE light
on the top of the handset is on during charging.
To order, visit our website at
1 (866) 288-4268
1 (800) 222-3111
or call
.
7
.