Table of Contents
Advertisement
2. Installation
2.1 Connection
Base Installation(Cable through the wall or ceiling with the mount base)
Secure the camera to the wall or ceiling by the camera stand (individual purchase).
•
Connecting to the RJ-45
Connect a standard RJ-45 cable to the network port of the network camera. Generally a
cross-over cable is used for directly connection to PC, while a direct cable is used for connection
to a hub or switch.
Micro SD memory slot
Remove the front cap of the camera to insert the SD memory card.
SD memory card slot
•
Connecting the Power
Connect the DC 12V power adaptor to the camera.
(This connection is not used if using PoE power)
Ceiling Mount
9
Wall Mount
Remove the front cap
Advertisement
Table of Contents
