Table of Contents
Advertisement
•
JPEG Setting
Pre-event: A pre-event buffer contains images from the time immediately preceding the
-
event trigger. These are stored internally in the server. This buffer can be very useful when
checking to see what happened to cause the event trigger.
Check the box to enable the pre-trigger buffer, enter the desired total length in seconds,
minutes or hours, and specify the required image frequency.
Post-event: This function is the counterpart to the pre-trigger buffer described above and
-
contains images from the time immediately after the trigger. Configure as for pre-event.
-
Prefix file name: This name will be used for all the image files saved. If suffixes are also
used, the file name will take the form <prefix>.<suffix>.<extension>
Additional suffix: Add either a date/time suffix or, a sequence number - with or without a
-
maximum value
HTTP Server
When the network camera detects an event, HTTP Server is used to receive uploaded image files
and/or notification messages. Check the box to enable the service.
•
HTTP Server Setting
-
Name: The name of the HTTP event server. Use a descriptive name.
URL: The network address to the server and the script that will handle the request.
-
For example: http://192.168.12.244/cgi-bin/upload.cgi
-
User name/Password: Provide your log-in information.
•
HTTP Server Test
When the setup is complete, the connection can be tested by clicking the Test button.
35
Advertisement
Table of Contents
