Table of Contents
Advertisement
3.8 Resetting to the factory default settings
To reset the Network Camera to the original factory settings, go to the Setup>System >Maintenance
web page (described in "3.5.6 System>Maintenance" of the User's Manual) or use the Reset button on
the network camera, as described below:
Follow the instructions below to reset the Network Camera to the factory default settings using the
Reset button.
Reset Button
•
Using the Reset Button
Follow the instructions below to reset the Network Camera to the factory default settings using
the Reset button.
1.
Switch off the Network Camera by disconnecting the power adapter.
2.
Press and hold the Reset button while reconnecting the power.
3.
Keep the Reset button pressed for at least 2 or more seconds.
4.
Release the Reset button.
5.
The network camera resets to factory defaults and restarts after completing the factory
reset.
Caution: When performing a Factory Reset, you will lose any settings you have saved.
(Default IP 192.168.1.10)
63
Remove the front cap
Advertisement
Table of Contents
