Table of Contents
Advertisement
Image
•
Image Appearance
This page provides access to the advanced image settings for the network camera.
Brightness: The image brightness can be adjusted in the range 1-10, where a higher value
-
produces a brighter image.
Contrast: The image contrast can be adjusted in the range 1-10.
-
Saturation: Adjust the image's contrast by raising or lowering the value in this field.
-
-
Hue: The image hue can be adjusted in the range 1-10.
-
Sharpness: Controls the amount of sharpening applied to the image. A sharper image
might increase image noise especially in low light conditions. A lower setting reduces image
noise, but the image would be less sharp.
-
Enable flip image: Check this box to flip the image.
-
Enable mirror image: Check this box to mirror the image.
-
Enable Noise Reduction: Check this box to reduce an image noise.
23
Advertisement
Table of Contents
