Table of Contents
Advertisement
AE & AWB
•
Exposure control
This page provides access to the advanced exposure control settings for the network camera.
-
Mode: Supports exposure modes to control the amount of light detected by the camera
sensor based on settings for light conditions. The default setting is Auto mode.
*
Automatic: Automatically sets the amount of light detected by the image sensor.
*
Hold Current: Fixes the exposure at its current state.
Value: Select a value in the drop-down list to tune the exposure. The default setting is 5.
-
-
Enable Backlight Compensation: Set this checkbox to activate the BLC operation.
-
Flicker Mode - Provides the options for flicker.
*
50Hz: Select at 50 Hz environments.
60Hz: Select at 60 Hz environments.
*
-
Enable Long Exposure: Set this checkbox to activate the electronic shutter of the camera.
* Max. Shutter: Select a shutter speed value in the drop-down list. The default setting is 1/15.
24
Advertisement
Table of Contents
