Fitting The Lower Support Frame; Installing The Appliance - Gaggenau AI 230 700 Use And Care Manual

Fitting the lower support frame

Attach upper and lower parts of the support frame at
the specified total height using 10 screws.
Notes
‒ Ensure that the lower support frame is in the
correct position. The open side must be facing
the control element of the cooktop.
‒ The support frame can be re-aligned by loosening
the fastening screws.

Installing the appliance

1 Hook the appliance from below into the support
frame.
Note: Ensure that the mains cable is not trapped.
2 Attach the appliance to the support frame using
2 fastening screws.
3 Hook in retaining clip and screw tight.
19