Energy Conservation Settings; Auto Power-Off At A Designated Time; Eco Picture Control; Energy Save - Sharp Aquos LC-40LB700X Operation Manual

Watching TV

Energy conservation settings

Auto power-off at a designated time

This function is conveniently used when, for instance,
going to bed while watching TV.
Press SLEEP.
1
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remain 2 hr. 00 min.
Each time you press SLEEP, the remaining
2
time switches as shown below.
0 hr. 30 min.
Off
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select "Off" by pressing SLEEP to cancel the sleep timer.

ECO picture control

This function automatically detects the image source
and decreases the power consumption while keeping
the brightness of the image unchanged.
Press MENU and the MENU screen displays.
1
Press c / d to select "ECO".
2
• ECO menu displays.
Press a / b to select "ECO picture control",
3
and then press ENTER.
Press c / d to select "On" or "Off", and then
4
press ENTER.
NOTE
• This function does not work when "AV MODE" is set to
"DYNAMIC (Fixed)" or "AUTO".
• This function does not work when "Energy save" is set to
"Standard" or "Advanced".
32
LC-40LB700X_en_d.indd 32 LC-40LB700X_en_d.indd 32
1 hr. 00 min. 1 hr. 30 min.
2 hr. 30 min. 2 hr. 00 min.

Energy save

This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
Press MENU and the MENU screen displays.
1
Press c / d to select "ECO".
2
• ECO menu displays.
Press a / b to select "Energy save", and then
3
press ENTER.
Press a / b to select "Standard" or
4
"Advanced", and then press ENTER.
Selected item
Standard Reduces the backlight brightness by
25%.
Advanced Reduces the backlight brightness by
50%.
Off The backlight brightness is the same
value of your settings in the selected "AV
MODE ".

Blu-ray disc Ecology

You can control the power on/off status of the Disc
Drive when power to the TV is on.
Press MENU and the MENU screen displays.
1
Press c / d to select "ECO".
2
• ECO menu displays.
Press a / b to select "Blu-ray disc Ecology",
3
and then press ENTER.
Press c / d to select "Enable" or "Disable",
4
and then press ENTER.
Selected item
Enable Power to Disc Drive is turned on when a
disc is inserted or when the input source
is switched to Blu-ray.
Disable Power to Disc Drive is turned on when TV
power is turned on.
Description
Description
8/10/2009 9:58:43 AM 8/10/2009 9:58:43 AM