Communication Setup - Sharp Aquos LC-40LB700X Operation Manual

Blu-ray disc Setup

Communication Setup

This allows you to perform and/or change the
communication setting. This setting is required to use
BD-LIVE functions that connect to the internet.
NOTE
• Make sure that the ETHERNET cable is connected to this
TV. (See page 16.)
• For manually performing the setting, the following
information of the connected router or modem is required.
Confi rm the information prior to the setting.
– IP address, netmask, gateway, DNS address
• Besides, if specifying a proxy server, the following
information specifi ed from your internet service provider is
also required. Confi rm the information prior to the setting.
– IP address and port number of the proxy server
Press MENU to display the MENU screen, and
1
then press c / d to select "Option".
Press a / b to select "Blu-ray disc Setup", and
2
then press ENTER.
Press a / b to select "Communication Setup",
3
and then press ENTER.
Press ENTER.
4
Press c / d to select "Change", then press
5
ENTER.
Setting the info. of the Ethernet
IP Address
Netmask
Gateway
DNS
Proxy
Change
• For initializing the current setting, select "Initialize",
then press ENTER.
66
LC-40LB700X_en_g.indd 66 LC-40LB700X_en_g.indd 66
[Current Setup]
: Auto Setup
: Auto Setup
: Auto Setup
: Auto Setup
: Not Use
Initialize
For setting the IP address, press c / d to
6
select "Yes" or "No", then press ENTER.
Do you obtain the IP address
automatically?
Yes
IP Address
Netmask
Gateway
Next
• If selecting "Yes": The IP address is automatically
obtained. (Go to the step 10.)
• If selecting "No": The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 68.)
Regarding each of the setup values, confi rm the
specifi cations of your broadband router.
Select "Next", then press ENTER.
7
Enter your DNS address.
8
Enter your DNS address
Primary
Secondary
Next
• The primary and secondary DNS addresses are
entered using the screen for inputting characters.
(See page 68.)
Regarding each of the setup values, confi rm the
specifi cations of your broadband router.
Select "Next", then press ENTER.
9
For setting the proxy server, press c / d to
10
select "Yes" or "No", then press ENTER.
Do you use the proxy server?
Yes
Address
Port
Next
• If selecting "Yes": The IP address or proxy server
name and port number for the proxy server
specifi ed from your internet service provider are
entered using the screen for inputting characters.
(See page 68.)
• If selecting "No": Go to the next step.
Select "Next", then press ENTER.
11
No
No
8/7/2009 12:37:55 PM 8/7/2009 12:37:55 PM