You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
You will need to cancel the current
programme before you can select a
new one.
Once a programme has started
- Cancelling the programme and then
selecting a different programme
^ Press the Start/Stop button.
The items will be cooled down,
depending on the temperature
reached and how long they have
been dried for.
If you press the Start/Stop button
again during the cooling down
phase, Finish will appear in the
display.
^ Switch off the tumble dryer by
pressing the jk button.
^ Switch on the tumble dryer by
pressing the jk button.
^ Select and start a new programme.
- Cancelling the programme and then
removing the laundry
^ Refer to the following: "Adding or
removing laundry after a programme
has started".
^ Switch the dryer off after closing the
door.
Changing the programme sequence
Changing Delay start
^ See "Delay start".
Adding or removing laundry
after a programme has started
^ Press the Door button.
^ Open the door.
^ Add or remove items as required.
^ Close the door.
^ Press the Start/Stop button.
Time remaining
Changes to the programme sequence
can alter the estimated time remaining
in the display.
25