Miele T 8861 WP Edition 111 Operating Instructions Manual page 37

Heat pump tumble dryer
Table of Contents

Advertisement

Problem
There are humming
noises.
A programme cannot
be started.
Power cut.
The interior drum
lighting is not
switched on.
Possible cause
The compressor is
operating.
There is no immediate
cause.
When power is restored to the tumble dryer after a
power cut, the programme will continue automatically.
The lighting switches off
automatically (to save
energy).
Problem solving guide
Remedy
None. These noises are
quite normal and do not
indicate a fault.
– Is the tumble dryer
switched on?
– Is the mains plug
plugged in?
– Is the door closed
properly?
– Has the fuse or circuit
breaker tripped?
– If you cannot remedy the
problem, there is a fault.
Call Miele.
– Switch the dryer off and
then on again.
– If the lamp needs to be
replaced, follow the
instructions under
"Changing the lamp" at
the end of this section.
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents