Miele T 8861 WP Edition 111 Operating Instructions Manual page 20

How to dry correctly
F Starting the programme
The Start/Stop button light will flash
when a programme is being selected.
The flashing indicates that a
programme can be started.
^ Press the Start/Stop button.
The Start/Stop button will now light up
constantly.
Perfect Dry only flashes/illuminates
during programmes with drying levels.
It remains dark during time controlled
programmes (see "Operating the
tumble dryer").
Note: The duration shown in the display
is only an estimate and can change.
Before the end of a programme
The heating phase is followed by a
cooling down phase (Cooling down
lights up). The programme is not
finished until the cooling down phase
has been completed.
G Removing the laundry at the end of
the programme
0 and Finish will appear in the display
to indicate that the programme has
finished. The buzzer (if selected) will
sound at intervals.
After the programme has finished, the
drum will continue to rotate for 2 hours
at intervals if the garments are not im-
mediately removed. This reduces
creasing.
There is no anti-crease with: Woollens.
The dryer has a standby mode. After a
programme has finished, the display
will switch off and the Start/Stop button
20
light will flash slowly. Also see
"Programmable functions".
^ Press the Door button.
^ Open the door.
^ Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
If the dryer is switched on and the door
is opened, the drum lighting will come
on. It will go out a few minutes later to
save energy.
^ Switch off the dryer by pressing the
jk button.
^ Clean the fluff filters.
^ Close the door.
^ Empty the condensed water
container.
We recommend draining it externally.
This means you will never have to
empty it manually again.
Using the Cottons Extra Dry programme
is recommended for a mixed cotton load
and is the programme used in energy
consumption tests to AS/NZS 2442
(Refer to www.energyrating.gov.au
website for consumption data).