Makita 9556PB Instruction Manual page 10

Operation with abrasive cut-off /
diamond wheel (optional accessory)
► Fig.11: 1. Lock nut 2. Abrasive cut-off wheel/dia-
mond wheel 3. Inner flange 4. Wheel guard
for abrasive cut-off wheel/diamond wheel
The direction for mounting the lock nut and the inner
flange varies by wheel thickness. Refer to the table
below.
100 mm (4")
Abrasive cut-off wheel
Thickness: Less than 4 mm (5/32")
1
2
16 mm (5/8")
3
1. Lock nut 2. Abrasive cut-off wheel
115 mm (4 - 1/2") / 125 mm (5")
Abrasive cut-off wheel
Thickness: Less than 4 mm (5/32")
1
2
22.23 mm (7/8")
3
1. Lock nut 2. Abrasive cut-off wheel
Thickness: 4 mm (5/32") or more
16 mm (5/8")
3.
Thickness: 4 mm (5/32") or more
22.23 mm (7/8")
3.
Diamond wheel
Thickness: Less than 4 mm (5/32")
1
4
20 mm (13/16")
3
Inner flange 4. Diamond wheel
Diamond wheel
Thickness: Less than 4 mm (5/32")
1
4
22.23 mm (7/8")
3
Inner flange 4. Diamond wheel
10 ENGLISH
Thickness: 4 mm (5/32") or more
20 mm (13/16")
Thickness: 4 mm (5/32") or more
22.23 mm (7/8")