Adjustments; Turning On The Projector; Adjustments After Parts Replacement - Sanyo PLV-75 Service Manual

Adjustments

Turning On the Projector

If the PIN code is set on the projector, you cannot use the projector. The PIN code can be reset to the factory default
setting (1234) according to the following procedure.
When you reset the PIN code, the Logo PIN code and key lock will be reset, as well.
1. Disconnect the AC power cord from the AC outlet.
2. As pressing the
SELECT
pressing the
3. Turn the projector on with the
Please refer to the owners manual for further information.

Adjustments after Parts Replacement

Condenser lens adjustment
Relay lens adjustment
R-Contrast adjustment
G-Contrast adjustment
B-Contrast adjustment
Output voltage adjustment
Fan output voltages adjustment
Video center adjustment
NRS adjustment
Reference voltages adjustment
PC input adjustment
AV Input adjustment
Common center adjustment
PC gamma shift adjustment
PC white balance adjustment
AV gamma shift adjustment
AV white balance adjustment
SELECT
button on the projector, connect the AC power cord into an AC outlet again. Keep
button until the POWER indicator lights continuously.
ON-OFF
button, enter the PIN code "1234" (the factory default setting).
LCD/Prism Condenser
Ass'y Lens
❍ ●
❍
●
●
❍
●
❍
● : Adjustment necessary
Disassembly/Replaced Parts
Polarized glass
Relay
Lens
R G
●
●
●
-19-
❍ : Check necessary
Sub
Power
Power
Board
B
Board
●
●
●
Main
Board
●
●
●
●
●
●
●
●
❍
●
❍