Leveling And Elevating Adjustments; Moving The Projector - Sanyo PLC-8815E Owner's Instruction Manual

Two feet adjust the projection angle.
The projection angle can be adjusted up to 6 ' degrees by
rotating the two (left and right) feet located on the bottom of the
projector.
Use the carry handle when moving the projector.
A
Retract the lens, replace the lens cover and rotate
the leveling/elevation feet fully clockwise when
moving the projector to prevent damage to the
projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
Do not drop or give a shock to the projector, otherwise damage or mulfunction may result.
l Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may
cause damage to the projector. To transport the projector through a courier or transport service, use a Sanyo
recommended Case.
l For a carrying or transportation cases, contact a Sanyo authorized dealer.

MOVING THE PROJECTOR

FEET