Set Your Country - Brother MFC-8370DN Quick Start Manual

Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
Before you connect the external telephone,
remove the protective cap
on the machine.
1
1 Extension telephone
2 External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Before you connect the external telephone
answering machine, remove the protective cap
from the EXT. jack on the machine.
1
Set the receive mode to External TAD if
you have an external answering machine.
See Choose a Receive Mode on page 6. For
additional details, see Connecting an
external TAD (telephone answering device)
in Chapter 7 of the User's Guide.
from the EXT. jack
a
1
2
a
5

Set your Country

You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a
Check that the power is turned on by plugging
in the power cord and turn the power switch on.
Press OK.
Set Country
Press OK Key
b
Press or to choose the country.
c
Press OK when the LCD shows your country.
d
The LCD prompts you to make sure of the
country again.
e
If the LCD shows the correct country, press 1
to go to step f.
—OR—
Press 2 to go back to step b to choose the
country again.
f
After the LCD shows Accepted, the machine
will restart automatically. After the restart, the
LCD shows Please Wait.
5