Assembly & Set-Up
Contents of Carton
•
One Lawn Mower
•
One Operator's Manual
Assembly
NOTE: This unit is shipped without gasoline or oil in the engine.
Fill up with gasoline and oil as instructed BEFORE operating your
mower.
Handle
1.
Remove any packing material which may be between
upper and lower handles.
a.
Remove wing nuts and carriage bolts from handle
as shown in Figure 3-1. Do not loosen or remove
adjacent hex head screws.
A
Figure 3-1
b.
While stabilizing mower so it doesn't move, pivot
upper handle up as shown in Figure 3-2. Do not
crimp cable while lifting the handle up.
•
One Grass Catcher
•
One Side Discharge Chute
A
2.
Remove the T-bolts from the handle brackets as shown in
Figure 3-3.
•
One Bottle of Oil
•
One Fuse
B
Figure 3-2
Figure 3-3
3
9