Sangean WFR-2D User Manual page 13

Connecting to your computer network-cont.
Touch the Internet option for the clock synchronization. The clock can also be updated from
DAB or the FM radio, from the Network, or not automatically updated. If you choose any option,
other than internet go to step 11. Otherwise you will first need to select the correct time zone and
daylight savings setting, see steps 9 and 10. If you choose None you will need to set the clock
manually, see section 'Manually setting the clock.'
9. Select the time zone which is applicable to your location.
10. You will then need to set the daylight Savings option according to your location (Daylight
Savings is also known as Summer / Winter time or BST/ GMT adjustment).
11. The display will then show a list of WiFi region options for the network set up. Touch the
required region. Do this even if planning to use the wired Ethernet connection. Your radio will
then scan for available WiFi networks.
12. The radio will enter the Network Settings Wizard and will display 'Scanning....' After a short
while the display will show a list of the available WiFi networks. If you are intending to use the
WiFi connection, go to step 13. To use the Ethernet connection to your router (with automatic
configuration), scroll through and touch the <Wired Network> menu item. The radio will attempt
to connect.
00:00
Select Time Zone
UTC +00:00: Dublin London
,
UTC +00:30:
UTC +01:00: Madrld, Amsterdam
00:00
Use Daylight Savings
No
Setup Wizard
Yes
00:00
Select WLAN Region
Most of Europe
Setup Wizard
France
Japan
00:00
<Rescan>
Network Wizard
Smith
Setup Wizard
Jones
<WPS>
<Rescan>
Setup Wizard
GB