Table of Contents
Advertisement
REMOTE Access
Remote Surveillance
Configuring ActiveX Control in Internet Explorer 8:
1.
Open Internet Explorer 8
2.
Click on Tools
3.
Select Internet Options in the pull-down menu
4.
Click on the Security Tab
5.
Select Trusted Sites
6.
Click on the Sites button
7.
Uncheck the "Require server verification (https:) for all sites in this zone"
button.
8.
Type the DVR's IP address (obtained during Network Setup) or DDNS domain
name (obtained through DynDNS.com setup) into the "Add this website to the
zone:" box.
9.
Click the Add button
10. Close the window.
11. Back in the "Security Tab" screen,
click the "Custom level..."button.
12. Pull down the "Reset to:" menu
button and select "Low"
13. Click the "Reset..." button
14. Click "Yes" when asked, "Are you
sure you want to change the setting
for this zone?"
15. Click OK
16. Click Apply
17. Click OK
18. Close Internet Explorer. You are
now ready to access the DVR using
Internet Explorer 8.
Using Remote Surveillance:
With your system connected, you can now log in to your DVR using Internet Explorer.
The software from the DVR will install the first time you access the DVR through In-
ternet Explorer and will allow you to operate the network remotely. The DVR supports
access over LAN and WAN, also supports IP and domain name access.
Logging Into Your System Remotely
With your IP address, you can now log in to your DVR system either locally or
remotely.
1.
Open Internet Explorer. To view locally: In the address bar enter the IP address
that your router automatically gave your DVR (see Port Forwarding section)
or your static IP address given to you by your Internet Service Provider or IT
administrator. To view remotely: In the address bar enter your IP address for
your computer (not the DVR IP address). This is either your IP address received
via "ipconfig" as described in Network Setup - "To get the router settings" or
your IP address as described in DDNS setup or by going to www.whatismyIP.
com. Note: For business applications, firewalls may restrict or mask the true
IP address of your computer. You may need to contact your IT administrator to
obtain this information.
2.
You must install the ActiveX® in order to access your system. Click the atten-
tion bar at the top of the main page and select Install ActiveX Control. DVR Net viewer will reset.
3.
In the warning box click Install. The login page appears. Leave the password field blank (default). NOTE: If you have
enabled passwords on your system, enter your USER or ADMIN password. However, only the ADMIN can change settings
and options on the system.
4.
Select LAN or INTERNET from the drop-down menu and click LOGIN.
Setup Required Prior to Remote Access
NOTE: Your system must be connected to your LAN or WAN, Windows and Internet Explorer must be configured
as described in the previous sections Configuring Windows "User Account Control" and Configuring Active X
Control in Internet Explorer and the DVR settings must have been setup properly as described in the Network
Setup for Remote Access section before attempting remote access.
Trusted Sites
Page 32
Internet Options-Security Screen
Security Settings
Remote Surveillance-Login Screen
Advertisement
Table of Contents
