Table Of Zones; Shutdown Diagnostics - Directed Electronics Python 1500 esp Installation Manual

To enter or exit timer mode manually:
1. Make sure the remote start system is not operating the engine.
2. Turn the ignition on.
Timer Mode will be exited and the parking lights will flash four times.

table of zones

When using the Diagnostic functions, use the Table of Zones to see which input has triggered the system. It is
also helpful in deciding which input to use when connecting optional sensors and switches.
ZONE NO. TRIGGER TYPE
1 Hood and/or Brake Trigger
2 Multiplexed Input
3 Door Trigger
4 Multiplexed Input
NOTE: The Warn Away® response does not report on the LED.

shutdown diagnostics

to perform shutdown diagnostics
1. With the ignition OFF, press and hold the Valet/Program button.
2. Turn the ignition ON and then back OFF while holding the Valet/Program button.
3. Release the Valet/Program button.
4. Press and release the Valet/Program button. The LED will report the last shutdown for one minute or until
the ignition is turned on.
46
INPUT DESCRIPTION
GRAY and BROWN wires on the 6-pin shutdown harness.
Heavy impact from the shock sensor.
GREEN (H1/5) and VIOLET (H1/7).
BLUE (H1/6)
© 2000 Directed Electronics, Inc. Vista, CA