Transmitter/Receiver Learn Routine - Directed Electronics Python 1500 esp Installation Manual

Car alarm system and remote start
Hide thumbs Also See for Python 1500 esp:
Table of Contents

Advertisement

transmitter/receiver learn routine

The system comes with two transmitters that have been taught to the receiver. The receiver can store up to four
different transmitter codes in memory. Use the following learn routine to add transmitters to the system or to
change button assignments if desired.
Using the optional DEI® Bitwriter™ or PC Interface, the learn routine may be locked. Make sure the learn routine
is unlocked before programming features. If the siren generates one long chirp when attempting to program the
unit, the learn routine is locked and must be unlocked using the DEI® Bitwriter™ or PC before proceeding.
The Valet®/Program button, plugged into the blue port, is used for programming. There is a basic sequence to
remember whenever programming this unit: Door, Key, Choose, Transmit and Release.
1.
Open a door. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)
2.
Key. Turn the ignition on. (The heavy gauge PINK wire of the relay satellite must be con-
nected.)
3.
Select the receiver channel. Press and release the Valet®/Program switch the number of
times necessary to access the desired channel. Once you have selected a channel, press and
HOLD the Valet®/Program switch once more. The siren will chirp and the LED will blink the
number of times corresponding to the channel that has been accessed.
NOTE: If adding a remote, a button must be taught to the unit in the Channel One or Channel Five
position prior to programming other channels.
CHANNEL NUMBER
1
2
3
4
5
6
7
8
9
10
*NOTE: For Auto Learn Configurations, see Transmitter Configurations section of this guide.
© 2000 Directed Electronics, Inc. Vista, CA
FUNCTION
Arm/Disarm/Panic
Silent Mode™/Remote Valet®/Trunk Release
Remote Start
Second unlock or other accessories
Arm only
Disarm only
Panic only
Auto Learn Standard Configuration* (default)
Auto Learn Single Button Arm/Disarm Configuration*
Delete all transmitters
WIRE COLOR
RED/WHITE
VIOLET/BLACK
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents