Feature Descriptions; Menu #1 - Directed Electronics Python 1500 esp Installation Manual

menu #3 - remote start options
FEATURE
3-1
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9

feature descriptions

The features of the system are described below. Features that have additional settings that can be selected only
when programming with the PC interface or Bitwriter are indicated by the following icon:
menu #1 - basic features
1-1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when the transmitter
is used. When set to passive, the system will arm automatically 30 seconds after the last door is closed. To alert
the consumer of passive arming, the siren will chirp 20 seconds after the door is closed. This provides the con-
sumer with an audible warning prior to the system actually arming. At the 30 second mark, the system will arm,
but the siren will not chirp.
1-2 CHIRPS ON/OFF: This feature controls the chirps that confirm the arming and disarming of the system.
1-3 IGNITION CONTROLLED DOOR LOCKS ON/OFF: When turned on, the doors will lock three seconds after
the ignition is turned on and unlock when the ignition is turned off. The TechSoft Programmer or the 998T
Bitwriter™ will display separate steps for ignition lock and ignition unlock. They can be programmed on or off
independently.
40
ONE-CHIRP SETTING (DEFAULT)
Engine checking on
Engine checking TACH
Run time: 12 minutes*
Parking lights flashing
Crank time 0.6 seconds
Voltage check - high
Auxiliary output - factory disarm
Status output
Anti-grind ON
TWO-CHIRP SETTING
Engine checking OFF
Engine checking VOLTAGE
Run time: 24 or 60 minutes*
Parking lights constant
0.8, 1.0, 1.2, 1.6, 1.8, 2.0, 4.0
Voltage check - low
Special accessory
Factory re-arm output
Anti-grind OFF
© 2000 Directed Electronics, Inc. Vista, CA