Table of Contents
Advertisement
Answering system settings
Message alert tone
When the message alert tone is set to on, and there is at least one new message, the
telephone base beeps every 10 seconds. The message alert tone is preset to off.
There is no audible alert at the handset.
Press MENU when the phone is not in use.
1.
to scroll to Answering sys, then press SELECT.
2.
Press
or
3.
Press
or
to scroll to Ans sys setup, then press SELECT.
to scroll to Msg alert tone, then press SELECT.
4.
Press
or
to select Tone: On or Tone: Off.
5.
Press
or
Press SELECT to save and you hear a confirmation tone.
6.
The answering system must be turned on for message alert tone
to beep.
Message recording time
You can set the recording time allowed for each incoming message. The message
length is three minutes by default.
1.
Press MENU when the phone is not in use.
to scroll to Answering sys, then press SELECT.
2.
Press
or
to scroll to Ans sys setup, then press SELECT.
3.
Press
or
to scroll to Recording time, then press SELECT.
4.
Press
or
5.
Press
or
to select 3 minutes, 2 minutes or 1 minute.
Press SELECT to save and you hear a confirmation tone.
6.
Voice language
You can select English or French to be used for the voice prompts in your
answering system. The voice language is preset to English.
Press MENU when the phone is not in use.
1.
to scroll to Answering sys, then press SELECT.
2.
Press
or
3.
Press
or
to scroll to Ans sys setup, then press SELECT.
to scroll to Voice language
4.
Press
or
to select English or Français.
5.
Press
or
Press SELECT to save and you hear a confirmation tone.
6.
, then press SELECT.
63
Msg alert tone
ECO
Tone: Off
ECO
Recording time
ECO
3 minutes
ECO
Voice language
ECO
English
ECO
Advertisement
Table of Contents
