Getting started
Wall mount to tabletop installation
1.
Remove the telephone base from the wall.
2.
If necessary, untie the bundled telephone line cord and power adapter cord.
3.
Pull the wall mount bracket to detach it from the telephone base. Swivel it upwards
and then press onto the telephone base until it clicks into place.
4.
Press down on the switch hook and slide the handset tab upwards to remove it from
the slot. Rotate the handset tab by 180 degrees. Press down the switch hook and
then replace the handset tab to its slot.
Switch hook
Handset tab
Wall mount position
7
Tabletop position