Table of Contents
Advertisement
Getting started
Installation options
3.
Route the telephone line cord through the cavity and leave a few inches for plugging
into the telephone wall jack. Press the wall mount bracket onto the telephone base
and click it into place.
4.
Put the corded handset aside. Press down the switch hook and remove the handset
tab from the slot. Rotate the handset tab by 180 degrees. Press down the switch
Switch hook
Handset tab
hook and then replace the handset tab to its slot.
5.
Plug the power adapter and telephone line into the wall outlets. Align the holes
on the wall mount bracket with the standard wall mounting plate and slide the
telephone down until it locks securely. Bundle the telephone line cord and
power adapter cord neatly with twist ties. Put the corded handset back on the
telephone base.
6
Advertisement
Table of Contents
