Telephone operation
End a home call
To end a home call on a cordless handset:
Press OFF or place the cordless handset in the handset charger.
•
To end a home call at the telephone base:
•
When you are using the corded handset, place it to the telephone base.
•
When you are using the base speakerphone, press
Call waiting on the home line
When you subscribe to call waiting service from your telephone service provider, you
hear a beep if someone calls while you are already on a call.
•
Press FLASH to put your current call on hold and take the new call.
Press FLASH at any time to switch back and forth between calls.
•
Make a cell call
To make a cell call on a cordless handset:
1.
Press
/CELL. The handset displays Select a device.
•
If you have only one cell phone connected to the telephone base,
press SELECT and then the handset displays D1 selected.
•
If you have two cell phones connected to the telephone base, press
select a cell phone and then press SELECT. Then the handset displays
D1/D2 selected.
2.
Enter the telephone number, then press
To make a cell call at the telephone base:
1.
Press
/CELL on the telephone base. The screen displays Select a device.
•
If you have only one cell phone connected to the telephone base,
press SELECT, the screen displays D1 selected.
•
If you have two cell phone, press
SELECT, the screen displays D1/D2 selected.
2.
Enter the telephone number, then press
•
The screen shows the elapsed time as you talk (in hours, minutes and seconds).
While entering numbers, press and hold PAUSE to insert a dialing pause
•
(a P appears).
•
While using the cell line, place your cell phone closer to the telephone base, and
make sure that there are no physical obstacles such as large furniture or thick walls
between the telephone base and the cell phone.
/HOME.
/CELL to dial.
or
to select a cell phone and then press
/CELL to dial.
31
or
to