Connection to other equipment
Please connect this Plasma Display Panel to other equipment as pictured below.
You may connect several types of equipment eg: DVD, VCD, VCR,
Set Top Box, X-Box and so on.
Video Signal Input Connections (DVD/VCD/VCR)
VIDEO1
VIDEO2
There are 2 Video inputs and 2 S-VIDEO inputs.
Each video source has its own set of R/L audio inputs.
There are 2 Component inputs: Y Cb Cr and Y Pb Pr.
Each Component source has its own set of R/L audio inputs.
If your DVD or Set Top Box has Y Cb Cr or Y Pb Pr outputs,
connect it to the appropriate component input jacks, then
select Y Cb Cr or Y Pb Pr source input using the Display Panel or Remote Control.
Notice: If the displayed picture appears corrupted, check the cable connection
and DVD output signal setup.
VIDEO INPUT
R
L
R
L
COMPONENT INPUT
Y Cb Cr
Y Pb Pr
S-VIDEO1
S-VIDEO2
R/L(480i,576i)
R/L(480P,576P,720P,1080i)
7
S-VIDEO INPUT
R
L
R
L