Safety Notice - Diamond Digital DV42P2 User Manual

Safety Notice

WARNING
Do not place the Plasma Display Panel on sloped or unstable surfaces.
• The Plasma Display may fall off or tip over.
Do not place any objects on top of the Plasma Display Panel.
• If water is spilt onto the Plasma Display or foreign objects get inside it, a short-circuit may occur
which could result in fire or electric shock. If any foreign objects get inside the Plasma Display,
please consult your local dealer.
If using the pedestal (optional accessory), leave a space of at least 10 cm at the top, left
and right, at least 6cm at the bottom, and at least 7 cm at the rear. If using some other
setting-up method, leave a space of at least 10 cm at the top, bottom, left and right, and
at least 10 cm at the rear.
Avoid installing near electronic equipment that is sensitive to electromagnetic radiation.
• It will cause interference in image, sound, etc. In particular, keep video equipment away from
this product.
When using the Plasma Display Panel
The Plasma Display Panel is designed to operate on 100-240 V~, 50/60 Hz.
Do not cover the ventilation holes.
• Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the
Plasma Display.
Do not stick any foreign objects into the Plasma Display Panel.
• Do not insert any metal or flammable objects into the ventilation holes or drop them onto the
Plasma Display, as doing so can cause fire or electric shock.
Do not remove the cover or modify it in any way.
• High voltage which can cause severe electric shocks are present inside the Plasma Display. For
any inspection, adjustment and repair work, please contact your local dealer.
Securely insert the power cord plug as far as it will go.
•If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is
damaged or the wall socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands.
• Doing so may cause electric shocks.
Do not do anything that may damage the power cable. When disconnecting the power
cable, pull on the plug body, not the cable.
• Do not damage the cable, make any modifications to it, place heavy objects on top of it, heat it,
place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause fire and
electric shock. If the power cable is damaged, have it repaired at your local dealer.
If the Plasma Display Panel is not going to be used for any prolonged length of time,
unplug the power cord plug from the wall outlet.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour
starts to come out from the Plasma Display Panel, immediately unplug the power cord
plug from the wall outlet.
• If you continue to use the Plasma Display in this condition, fire or electric shock could result. After
checking that the smoke has stopped, contact your local dealer so that the necessary repairs
can be made. Repairing the Plasma Display yourself is extremely dangerous, and should not be
attempted.
18