6. TIMER
Timer menu
CURRENT TIME: Set the current time.
POWER ON TIME: Set the power on time.
To enter Standby mode, current time and power off time must be set.
POWER OFF TIME: Set the power off time. Current time must be set first.
POWER SAVING TIMER: If no signal input is detected, the Panel will enter standby.
Power saving timer options: 5Min → 10Min → 15Min → 20Min → 25Min → 30Min
● How to set the time:
Press"VOL+
" VOL+
● All time settings are configured as above.
● POWER ON CHANNEL: Once power is on, the Panel will display the
selected channel.
number.
"key to enter time set sub menu. Press"
" key set Hours :Minutes .
/ VOL+
" keys to increase or decrease the channel
17
"or