Table of Contents
Advertisement
● D-SUB 15 Pin:
Attach a VGA cable from your PC to the D-SUB input on the back of your Plasma
Display Panel.
Connect a 3.5mm line cable from your PC soundcard to the AUDIO input jack
beside the D-SUB input.
Change the source to "D-SUB" by pressing the "GRAPHIC"button on the
Remote Control, or by pressing the"MODE"button on the front panel
controls. Then turn on the PC.
● DVI-D:
Attach the DVI-D 24 pin signal cable (TMDS cable) from your equipment to the
DVI-D jack at the back of your Plasma Display Panel. Connect a 3.5mm line cable
from the headphone output on your equipment to the AUDIO input beside
the DVI-D jack.
Change the source to "DVI" by pressing the "GRAPHIC" button on the
Remote Control, or by pressing the "MODE" button on the front panel controls.
Then turn on the equipment.
Video Output Connection
The VIDEO output is analogue Video (CVBS).
L & R are left and right Audio out channels. They can be connected to analogue
Video (CVBS) and Audio inputs on other devices. See picture above.
VIDEO OUTPUT
9
Advertisement
Table of Contents
