Turn On The Plasma Display; Remote Control Setup; Front Panel Controls - Diamond Digital DV42P2 User Manual

3. Turn on the Plasma Display Panel
When the Display is on, the Power Indicator LED will be lit as follows:
Power Indicator Green: Turned On
Power Indicator Red: Stand by
If the Power Indicator is red, press the "
"POWER" key on the Remote Control, to turn on the unit.

4. Remote Control Setup

① Slide off the battery cover
② Insert batteries
Note correct polarity (+and -).
③ Replace the cover
• Make sure that the batteries are fitted the
correct way round.
• Do not mix different battery types or use
rechargeable batteries.

5. Front panel controls

" key on the Front panel controls or the
5