Advertisement
Names of parts
■ Outdoor Unit
9
Indoor Unit
■
1. Air outlet
2. Air outlet grille: (Field supply)
• Appearance of the Air outlet grille and Air inlet
grille may differ with some models.
Outdoor Unit
■
5. Air inlet: (Back and side)
6. Refrigerant piping and inter-unit cable
7. Drain hose
Appearance of the outdoor unit may differ from some models.
Please note
■
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn
the breaker OFF.
•
Use the air conditioner in the following conditions.
MODE
Outdoor temperature: <2MXM> -10–46°C
COOL
Indoor temperature:
Indoor humidity:
Outdoor temperature: <2/3/4/5MXM> -15–24°C
HEAT
Indoor temperature:
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
5
5
Operating conditions
<3/4/5MXM> -10–46°C
18–32°C
80% max.
10–30°C
3. Suction grille: (Option)
• Appearance of the suction grille and Air inlet
grille may differ with some models.
4. Air inlet
• The operation mode refers to the following table.
Temperature
Mode
FDXM
AUTO
8. Earth terminal:
• It is inside of this cover.
9. Air outlet
If operation is continues out of this range
• A safety device may work to stop the
operation. (In multi system, it may work to stop
the operation of the outdoor unit only.)
• Condensation may occur on the indoor unit
and drip.
• A safety device may work to stop the
operation.
6
7
8
Air flow
setting
rate
25°C
AUTO
Advertisement
