Table of Contents
Advertisement
Operating a TV
To operate a TV Receiver (TV) (Optional), set "Setting the Primary
AUX Name (AUX Setup)" (page 44) or "Setting the Secondary AUX
Name" (page 44) to "TV."
Change to the TV mode
Touch [TV] of Top banner.
The display shows the TV mode screen.
About the TV Operation Screen
When the TV playback screen is displayed, you can touch the screen to
display the operation screen. For details on how to operate, refer to the
Owner's Manual of the connected TV.
[
]*, [ ]*
Switches the Channel number / Preset channel / frequency
down.
[
]*, [ ]*
Switches the Channel number / Preset channel / frequency
up.
[Tune] (Channel or Preset or Manual)
Switches amongst Channel mode, Preset mode, and
Manual mode.
[Band]
Switches the band.
[A.Memo]
The tuner automatically seeks and stores stations.
* The
,
buttons provide the same functions above.
Operating a USB Player or DAB/DAB+
TUNER
To operate a USB Player or DAB/DAB+ TUNER (Optional), set
"Setting the Primary AUX Name (AUX Setup)" (page 44) or "Setting
the Secondary AUX Name" (page 44) to "USB-PLAYER" or "DAB."
For details on how to operate, refer to the Owner's Manual of the
connected device.
Change to the USB-PLAYER or DAB/DAB+
Mode
Touch [USB-PLAYER] or [DAB] of Top banner.
The display shows the USB Player or DAB mode screen.
• The operation screen changes to the visual screen in the AUX mode
for 5 seconds after an operation has been performed. To hide the
AUX operation screen, touch the display area.
• Directly touch operation switches displayed on the screen to operate.
To display the top banner, touch [Control].
61
-EN
Advertisement
Table of Contents
